My Tiger instrument is showing me a pump error. What do I need to do?

My Tiger instrument is showing me a pump error. What do I need to do?

Il mio strumento Tiger mi sta mostrando un errore della pompa. Cosa devo fare?

My Tiger instrument is showing me a pump error. What do I need to do?

The pump error indicates that there might be a blockage or leak within the system. Firstly, we would recommend checking to ensure that the inlet and outlet of the instrument are not blocked or restricted. Next, please check the PTFE filter at the probe inlet to see whether this requires a replacement. Then, please inspect the black sensor seal within the sensor compartment and the MiniPID electrode stack for signs of damage, discolouration or residue. It may be necessary to carry out some simple user maintenance.

For further support, please contact technical.support@ionscience.cn.

 

The pump error indicates that there might be a blockage or leak within the system. Firstly, we would recommend checking to ensure that the inlet and outlet of the instrument are not blocked or restricted. Next, please check the PTFE filter at the probe inlet to see whether this requires a replacement. Then, please inspect the black sensor seal within the sensor compartment and the MiniPID electrode stack for signs of damage, discolouration or residue. It may be necessary to carry out some simple user maintenance.

For further support, please contact technical.support@ionscience.cn.

 

L’errore della pompa indica che potrebbe esserci un blocco o una fuga all’interno del sistema. In primo luogo, si consiglia di verificare che l’ingresso e l’uscita dello strumento non siano bloccati o limitati. Successivamente, si prega di controllare il filtro PTFE all’ingresso della sonda per vedere se questo richiede una sostituzione. Quindi, si prega di ispezionare la guarnizione nera del sensore all’interno dello scomparto del sensore e lo stack di elettrodi MiniPID per verificare che non vi siano segni di danni, scolorimenti o residui. Potrebbe essere necessario effettuare una semplice manutenzione da parte dell’utente.

Per ulteriore supporto, si prega di contattare technical.support@ionscience.cn

The pump error indicates that there might be a blockage or leak within the system. Firstly, we would recommend checking to ensure that the inlet and outlet of the instrument are not blocked or restricted. Next, please check the PTFE filter at the probe inlet to see whether this requires a replacement. Then, please inspect the black sensor seal within the sensor compartment and the MiniPID electrode stack for signs of damage, discolouration or residue. It may be necessary to carry out some simple user maintenance.

For further support, please contact technical.support@ionscience.cn.

 

在线客服
离科科技
12:01
您好,有任何疑问请与我们联系!
https://ionscience.cn
[电话]
https://ionscience.cn
[传真]

选择聊天工具: